RGW Equipment

Specifications

• 2024 Manitou Group Construction Telehandlers MT 735 75D ST5
• Year2024
• ManufacturerManitou Group
• Model NameConstruction Telehandlers
• Trim NameMT 735 75D ST5
• Generic Type (Primary)General
• Enginenorm: Stage V / Tier 4 Final | Model: TCD 3.6 L
• Engine ManufacturerDeutz
• Cylinder Liners4 - 178 in³
• Engine Power75 Hp / 54.60 kW
• Engine Torque, Maximum277 ft/lbs @ 1400 rpm
• Drivetrain
• Steering2 wheel steer, 4 wheel steer, Crab mode
• TransmissionType: Hydrostatic | Max. travel speed: 15 mi/h
• GearsNumber of gears (forward / reverse): 2 / 2
• Brakes
• Brake System TypeService: Hydraulic
• Wheels & Tires
• Tires, Rear SpecificationALLIANCE 380/75 R20 148A8 A580
• Tires, Front SpecificationALLIANCE 380/75 R20 148A8 A580
• Operational
• Operating ConditionsBreakout force with bucket: 6850 daN | Lifting: 5.90 s | Lowering: 4.20 s | Extension: 12.30 s | Crowd: 4.70 s | Dump: 2.44 s | Drawbar pull (Laden): 3860 daN | Vibration on hands/arms: < 2.50 m/s²
• Performance
• Noise LevelNoise at driving position (LpA): 74 dB | Noise to environment (LwA): 103 dB
• Hydraulics
• Pump TypeGear pump
• Hydraulic Flow23 US gpm
• Maximum Pressure3553 PSI
• Lights and Safety
• Safety FeaturesSafety cab homologation: Cabin ROPS - FOPS Level 2
• DimensionsMax. outreach: 13 ft 1 in | Tilt-down angle 116 ° | Tilt-up angle 11 ° | Forks section: 2 in
• Lift HeightMax: 22 ft 8 in
• Overall Lengthto carriage: 15 ft 8 in| (with forks): 19 ft 8 in
• Ground Clearance1 ft 5 in
• Wheelbase9 ft 2 in
• Lengthto face of forks: 27 ft 6 in | Forks: 42 in
• Overall Width7 ft 6 in | cab: 2 ft 7 in
• Overall Height8 ft 2 in
• Turning RadiusExternal turning radius (over tyres): 12 ft 5 in
• WidthForks: 4 in
• Capacities
• Cargo CapacityMax: 7716 lb
• Oil capacityEngine oil: 3 US gal | Hydraulic oil: 30 US gal
• Fuel Capacity24 US gal
• Weights
• WeightUnladen (forks): 15278 lb | Unladen: 14573 lb | Overall: 15278 lb