Current Manitou Group Machines Construction Telehandlers

2024 Manitou Group Construction Telehandlers MTA 12042 Series IV

2024 Manitou Group Construction Telehandlers MTA 12042 Series IV

Swipe to View More

  • Year 2024
  • Make Manitou Group
  • Model Construction Telehandlers
  • Engine norm: Tier 4 final | Model: TCD 3.6 L4
Shop Manitou Group Pre-Owned
Product Details Specifications Photos
2024 Manitou Group Construction Telehandlers MTA 12042 Series IV

2024 Manitou Group Construction Telehandlers MTA 12042 Series IV

  • Year 2024
  • Manufacturer Manitou Group
  • Model Name Construction Telehandlers
  • Trim Name MTA 12042 Series IV
  • Generic Type (Primary) General
  • Engine Manufacturer Deutz
  • Engine norm: Tier 4 final | Model: TCD 3.6 L4
  • Cylinder Liners 4 - 0.23 in³
  • Engine Power 89 kW
  • Engine Torque, Maximum 354 ft/lbs @ 1600 rpm

2024 Manitou Group Construction Telehandlers MTA 12042 Series IV

The MTA 12042 construction telehandler is ideal for industrial sites requiring a lift height of up to 12.8 m and heavy-capacity handling up to 5.5 t. The tight turning radius of the MTA 12042 combined with its intuitive controls provide you with incredible maneuverability, even in confined spaces. This all-terrain construction telehandler is extremely stable, even when the boom is deployed, thanks to outriggers and the rear axle locking system. You can use this machine to transport all manner of loads--engaging a variety of attachments on the boom--to the various levels of your construction site: winches, buckets, jibs, forks, tire handlers, skips, etc.

Engine

Engine Manufacturer Deutz
Engine norm: Tier 4 final | Model: TCD 3.6 L4
Cylinder Liners 4 - 0.23 in³
Engine Power 89 kW
Engine Torque, Maximum 354 ft/lbs @ 1600 rpm

Drivetrain

Transmission Type: Torque converter with powershift
Gears Number of gears (forward / reverse): 4 / 3
Drive Control Single joystick with FNR

Brakes

Parking Brake SAHR
Brake System Type Service: Wet disc brakes

Wheels & Tires

Tires, Rear Specification 14 x 24 | Drive wheels: 2
Tires, Front Specification 14 x 24 | Drive wheels: 2

Operational

Operating Conditions Lifting: 15 s | Lowering: 10 s | Extension: 14 s | Retraction: 10 s | Crowd: 6 s | Dump: 3 s

Hydraulics

Pump Type Gear pump
Hydraulic Flow 157 l/min
Maximum Pressure 3002 PSI

Chassis

Frame Type Frame levelling longitudinal +/- 10 °

Lights and Safety

Safety Features Safety cab homologation: ROPS/FOPS

Dimensions

Dimensions Max. outreach: 27 ft 11 in | Tilt-down angle 112 ° | Tilt-up angle 12 °
Lift Height Max: 42 ft
Overall Length to carriage: 19 ft 4 in | (with forks): 19 ft 4 in
Ground Clearance 18 in
Wheelbase 10 ft 4 in
Length to face of forks: 27 ft 6 in
Overall Width 8 ft 4 in | cab: 33 in
Overall Height 7 ft 11 in
Turning Radius External turning radius: 13 ft 11 in

Capacities

Cargo Capacity Max: 12000 lb
Oil capacity Engine oil: 4 US gal | Hydraulic oil: 45 US gal
Fuel Capacity 47 US gal | DEF tank capacity: 5 US gal

Weights

Weight Unladen weight (with forks): 25201 lb

Features

Features Axle Manufacturer: Dana

Product Photography

Warning WARNING: Operating, servicing and maintaining a passenger vehicle, an off-highway motor vehicle or a recreational marine vessel can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or vessel in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle or vessel. For more information go to https://www.p65warnings.ca.gov/products/passenger-vehicle and https://www.p65warnings.ca.gov/products/marine.