2024 Manitou Group Construction Telehandlers ULM 415 H
- Year 2024
 - Make Manitou Group
 - Model Construction Telehandlers
 - Engine norm: Stage V / Tier 4 final | Model: 3TNV88C-DMU
 
2024 Manitou Group Construction Telehandlers ULM 415 H
The ULM telehandler is designed to help you save time and money. It is adapted to many types industries: lanscaping companies, riding schools, building companies... Thanks to its 1.25 t or 1.5 t capacity (2 models are available), the ULM can easily place pallets of blocks or bricks, straw or hay bales... Its ultra compact dimensions and rough terrain abilities make this machine particularly adapted to work in tight spaces on all types of grounds. Due to its lightweight, the ULM can also easily be transported on a small trailer. If you need to fully adapt your machine to your environment, numerous options are available: the auto reversing fan, the air prefilter, a full range of tyres...
Engine
							Engine Manufacturer
							Yanmar
						
						
							Engine
							norm: Stage V / Tier 4 final | Model: 3TNV88C-DMU
						
						
							Cylinder Liners
							3 - 100 in³
						
						
							Engine Power
							35.10 Hp / 26.20 kW
						
						
							Engine Torque, Maximum
							105 Nm @1950 rpm
						
						
							Cooling
							3 radiators (water + hydraulic oil + fuel)
						
						Drivetrain
							Transmission
							Type: Hydrostatic | Max. travel speed (may vary according to applicable regulations): 16 mi/h
						
						
							Gears
							Number of gears (forward / reverse): 2 / 2
						
						
							Drive Control
							JSM
						
						
							Differential Lock
							Limited slip differential on front and rear axles
						
						Brakes
							Parking Brake
							Automatic negative parking brake
						
						
							Brake System Type
							Service: Hydraulic servo brake
						
						Wheels & Tires
							Tires, Rear Specification
							CAMSO - MPT 552 - 10.0/75-15.3 124A8  
						
						
							Tires, Front Specification
							CAMSO - MPT 552 - 10.0/75-15.3 124A8  
						
						Operational
							Operating Conditions
							Breakout force with bucket: 1880 daN | Lifting: 8.80 s | Lowering: 7 s | Extension: 6.40 s | Retraction: 4.30 s | Crowd: 3.40 s | Dump: 2.60 s | Drawbar pull (Laden): 2000 daN | Vibration to whole hand/arm: < 2.50 m/s²
						
						Performance
							Noise Level
							Noise at driving position (LpA) tested following NF EN 12053 norm: 76 dB | Environmental noise (LwA): 104 dB
						
						Hydraulics
							Pump Type
							Gear pump
						
						
							Hydraulic Flow
							48 l/min
						
						
							Maximum Pressure
							3408 PSI
						
						Lights and Safety
							Safety Features
							Safety cab homologation: Cabin ROPS - FOPS Level 1
						
						Dimensions
							Dimensions
							Max. outreach: 8 ft 7 in | Tilt-down angle 116 ° | Tilt-up angle 23 ° | Front overhang: 2 ft 6 in
						
						
							Lift Height
							Max: 14 ft 1 in
						
						
							Overall Length
							to carriage (with hitch): 11 ft 5 in
						
						
							Ground Clearance
							11 in
						
						
							Wheelbase
							7 ft
						
						
							Overall Width
							4 ft 11 in | cab: 2 ft 2 in
						
						
							Overall Height
							6 ft 4 in
						
						
							Turning Radius
							External turning radius (over tyres): 8 ft 7 in
						
						
							Height
							Reach at max. height: 3 ft 3 in
						
						Capacities
							Cargo Capacity
							Max: 3307 lb  
						
						
							Oil capacity
							Hydraulic oil: 10 US gal
						
						
							Fuel Capacity
							9 US gal  
						
						Weights
							Weight, As Shipped
							Shipping mass (min. / max.): 5952 lb / 6393 lb